Pages

Tuesday, April 30, 2013

Sunset Flowers - FTU

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Gennadiy Koufay
This tube was purchased at CILM which has closed
Koufay has retired so her tubes are no longer available
FTU Scrap Kit by Mizteeque from  called "Sunset"
You an download this awesome kit HERE
Mask #6 from Chrissy's Chaos HERE
Don't forget to leave some love when downloading
 
Plugins Used:
Xero Radiance
Ok Lets get Started:
Open blank 700x700 canvas
Open paper 2 & apply mask
Open element 32 & place as new layer
 
Place tube of choice in center of frame
Apply Xero Radiance with settings of choice
I always build around my tube
 
I added the following elements:
Element 3
Element 11
Element 15
Element 16
Element 17
Element 18
Element 19
Element 23
Element 24
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 30,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Flower Beauty - PTU

 photo flowerbeauty.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ellie_Milk
Which you must obtain a license to use at Pic for Design HERE
PTU kit by Cari from Black Widow Creations called "Flower Me2"
You can purchase this kit at her store HERE
Template #3 by Chichi from Chichi Designz HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x675
delete copyright,wordart,bullets & long rectangles
 
Click on rotated pink rectangle selections,select all, float,defloat
add new layer & flood fill with white
select none delete the original
add noise with settings of choice
 
Click on rotated black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Add noise to big pink & white square
 
Click on black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Add noise to white rectangle
 
Click on gradient rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on pink square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 2
Element 3
Element 13
Element 19
Element 21
Element 22
Element 32
Element 35
Element 36
Element 38
Element 42
Element 43
Element 44
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 30, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sweet Emo Punk - FTU

 photo sweetemopunk.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at PTE which has now closed
You can purchase his tubes now at his own store HERE
Facebook FTU kit by Cari from Black Widow Creations called "Dark Pink Emo"
All you have to do is like her to get this great kit HERE
Mask #8 from Kristin from Toxic Desirez HERE
Please leave some love when you download
 
Plugins:
Xero Porcelin
Filters Unliminted
Eyecandy Gradient Glow
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 18 & place as a new layer
Apply Eyecandy Gradient Glow to frame
Grab freehand tool & draw around frame
Drop down under frame & add new layer
Open paper 3 & paste into selection
Apply Filters Unliminted Fine Canvas Texture
Apply Filter Unliminted Fine Fibrous Paper Texture
Place closeup of tube inside frame
Apply Xero Radiance with settings of choice
Place your main tube to left of frame
Apply Xero Porcelin again
 
Add elements around the tube
Here are the ones I used:
Element 1
Element 2
Element 5
Element 6
Element 7
Element 12
Element 13
 
Merge your layers
Open paper 1 & apply mask
I added noise to my mask layer
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 30,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, April 29, 2013

At The Hop - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jay Trembly
You must obtain a license to use this art at SATC HERE
PTU Scrap Collab Kit from Designs by Sarah called "At The Hop"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Mask of choice
 
Plugins Used:
Xero Radiance
 
Resize your elements to your liking
 
Ok Lets get Started:
Open blank canvas 700x700
Open counter element & place near bottom of tag
Open the 2 record elements and place on counter
Open bar stool element & place in front of counter
Open jukebox element & place behind counter to the right
 
Place your main tube like she is sitting on the counter
Apply Xero Radiance with settings of choice
 
Now add any other elements you want to your tag
I used:
Burger
Cola
Ketchup
Milkshake
Mustard
Print 1&2
 
Merge your layers
Open paper 7 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 29,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Punk It - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ismael Rac
You must obtain a license to use his art HERE
PTU Scrap Kit by Crystals Creations called "Punk It"
You an purchase this awesome kit at Designer Scraps HERE
Mask #157 by Vaybs HERE
Don't forget to leave some love when you download
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 12 & place in center
Grab the magic wand & click inside the frame
Selections modify expand by 5
Open paper 6 & paste as new layer
Selections invert delete
Move paper under frame
Open element 25 and paste as new layer in frame
Duplicate as many times to fill the frame
 
Place your main tube to right of tag
Apply Xero Radiance with settings of choice
 
Now add any other elements you want to your tag
I used:
Element 8
Element 9
Element 17
Element 20
Element 31
Element 33
 
Merge your layers
Open paper 12 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 29,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Hot Bubblegum - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ismael Rac
Which you must obtain a license to use at his store HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Bubblegum Passion"
You an purchase this awesome kit HERE
Template #202 by Millie HERE
Mask #12 by Millie HERE
Don't forget to leave a thank you when downloading
 
TY Jen for making this awesome kit for me!!!!!
You are the best!!!
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright & raster 5
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
add border with color and noise of choice
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add border with color and noise of choice
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
add border with color and noise of choice
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click raster 7 selections,select all, float,defloat
add new layer and fillm with gradient of choice
effects texture blinds with settings of choice
select none delete the original
 
Add close-up of tube inside the circle
apply Xero Radiance with settings of choice
 
Place the wordart where desired and apply border
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bomb
Bow 1
Bubblegum Machine
Cupcake 1
Flower 1
Ice Cream
Puppy 1
Speakers
Wire Heart

Merge your layers
Open paper 6 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 29, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Saturday, April 27, 2013

Troublemaker - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zlata_M
Which you must obtain a license to use at SATC HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Fantasy Maker"
You an purchase this awesome kit HERE
Troublemaker Template by Flaminsal HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used
Tramages Pool Shadow
Xero Fritillary
Xero Radiance
Filters Unliminted
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,wordart 2 & shape 3
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on shape 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on shape 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on light grey oval selections,select all, float,defloat
add new layer and flood fill with grey
add noise with settings of choice
select none delete the original
 
Click on dark grey oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on grey square selections,select all, float,defloat
add new layer and flood fill with grey
add noise with settings of choice
select none delete the original
 
Click on black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper 3
selection invert delete
select none delete the original
 
Add closeup of tube in the square
Apply Xero Radiance with settings of choice
 
Click on wordart selections,select all, float,defloat
add new layer & flood fill with light color of choice
pick another color for the background
apply Filters Unliminted Gradient Linear Wave
apply Tramages Pool Shadow with default settings
apply Xero Fritillary with settings of choice
apply Eyecandy Gradient Glow with a darker color
selection invert delete
select none delete the original
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bag
Bfly 1
Bomb
Flower 1,2&3
Flute
Kitty 2
Lipstick
Lollipop 1
Polish
Ribbon 1
Spray Can

Merge your layers
Open paper 3 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, April 25, 2013

I'm A Bad Girl - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ismael Rac
Which you must obtain a license to use at his store HERE
FTU Scrap Kit by Kittz from Kittz Kreationz called "Bad Girlz" HERE
Template #36 by Flaminsal HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Xero Fritillary
Tramages Pool Shadow
Penta Color Dot
Eyecandy 4000 Gradient Glow
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Deleted copyright
 
Click on grey oval 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on pink oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Open element 46 and place at oval
See my tag for placement
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Open element 60 and place in front of rectangle
See my tag for placement
 
Click on green oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on blue oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Apply Xero Fritillary to pink square
 
Click on white square selections,select all, float,defloat
add new layer and flood fill with gradient of choice
apply Tramages Pool Shadow
apply Penta Color Dot
select none delete the original
 
Add close-up of tube inside frame
Apply Xero Radiance with settings of choice
 
Click on small pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Apply Eyecandy Gradient Glow to wordart
 
Place your main tube to right of tag
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 9
Element 14
Element 17
Element 20
Element 23
Element 30
Element 40
Element 41
Element 42
Element 48
Element 59
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 25,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tags made by Shelly

 
 
Shelly sent me these 2 tags she made with 2 of my tutorials.
TY sweetie for trying my tuts & sending them to me photo rhondaSiggyApr2013.png

Monday, April 22, 2013

I Love Music - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at PTE which has closed
You can purchase his tubes at his store HERE
FTU Scrap Kit by Stacie from the Elias Blog Train HERE
Template #1 by Millie from the Elias Blog Train HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Eyecandy 4000 Gradient Glow
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x650
Delete copyright & wordart
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on layers 5 selections,select all, float,defloat
add new layer and flood fill with solid color of choice
selection invert delete
select none delete the original
 
Click on layers 7&8 selections,select all, float,defloat
add new layer and flood fill with solid color of choice
selection invert delete
select none delete the original
 
Place your main tube
apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Guitar
Ipod
Music Notes
Record
Scatter
Sparkles
Speakers
Wire 1
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Love Addict - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Amy Matthews
You can purchase her tubes at CDO HERE
PTU kit by Cari from Black Widow Creations called "Love Addict"
You can purchase this kit at her store HERE
Mask of choice
Plugins:
Xero Porcelin
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 16 & place as a new layer
resize frame 85%
Grab the magic wand & click inside the frame
Selection modify expand by 5
Open paper 3 & place as a new layer
Selections invert delete
Move paper under frame
Place your main tube to left of frame
Apply Xero Porcelin
 
Add elements around the tube
Here are the ones I used:
Element 1
Element 6
Element 7
Element 9
Element 12
Element 17
Element 20
Element 21
Element 24
Element 30
Element 34
Element 35
 
Merge your layers
Open paper 6
Apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sweet Love Bug - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase his tubes at Garv-Girls PSp Tubes HERE
PTU Scrap Kit by Mizteeque from  called "Love Bug"
You an purchase this awesome kit HERE
Excluisve Valentine Template by Christene HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright
 
You will need to resize the elements to your choice
I didn't use any dropshadow on the template
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on raster 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on raster 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
 
Click on copy of raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Add tube you are using
Apply Xero Porcelain
 
Now add any other elements of choice
I used the following:
Element 2
Element 5
Element 11
Element 19
Element 20
Element 23
Element 26
Element 28
Element 36
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 1,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Love - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Eugene Rzhevskii
You can purchase this tube at Pics for Design HERE
FTU Scrap Kit by Melissa HERE
Valentine Template #2 by Flaminsal HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete the copyright,hearts & dotted circle
 
Lets work on the wordart first
I used a pink color on the word then used a blind effect
I then used a red color for the background
Merge the 2 together and dropshadow
 
I am using a sitting tube so I moved the wordart under my tube
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on black border selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on red squares circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
On the top red square add a close-up of tube you are using
Apply Xero Radiance with default settings
Add blinds effect
 
Click on black squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Add noise 45% uniform
 
Place your main tube in the circle frame
Xero radiance with settings of choice
 
Open raster 31 - resize 90% - position under wordart
Open raster 29 - resize 90% - position to the right beside wordart (I mirrored mine)
Open raster 21 - position on bottom left of tag behind wordart
Open raster 20 - position on bottom left of tag beside other cupcake
Open raster 16 - position in center of tag at the top
Open raster 5 - position to right of tag behind tube and pink hearts
 
Merge your layers
Add mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Pink Garv Valentine - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
I bought this tube at MPT which is now closed
You can now purchas his tubes at his store HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Pink Passion"
You an purchase this awesome kit at her store HERE
Template #149 from Pooker HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 85% with all layers checked
Canvas 700x700
Delete copyright,pink dotted outlines,black dotted circle 2 & sideways valentines
 
Add noise to all the white circle and lines
 
Click on black squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on pink squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper25
selection invert delete
select none delete the original
 
Click on white stripes selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on grey squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on pink circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on light pink circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original
 
Click on white circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original
 
Add close up of tube inside the circles
Add Xero Radiance with settings of choice
Change blend mode to Luminicious (L)
 
Click on lt pink circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on white circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on pink background selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original
 
Click on black scalloped frames selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
 
Click on white squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
 
Add close up of tube inside the 2 outer squares
Add Xero Radiance with settings of choice
Change blend mode to Luminicious (L)
 
Click on black strips selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on pink heart strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Place your main tube
Add Xero Radiance again
 
Now time to add our elements
I used the following:
Element 11
Element 11
Element 17
Element 22
Element 29
Element 39
Element 46
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 17, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Blue Valentine - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zlata_M
You must obtain a license to use her art at Pics for Design HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Blue Dreams"
You an purchase this awesome kit at her store HERE
Mask of choice
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 74 - resixe and place in center of canvas
Place your main tube in the center
Add Xero Radiance
Grab the selection tool and draw a rectangle around the frame
Open paper 20 and place as a new layer
selections invert delete
move paper under frame
Place close up of tube in the outer frames
Apply Xero Radiance again
Now lets add our elements around the tube
I used:
Element 76
Element 77
Element 79
Element 86
Element 87
Element 96
Element 99
 
Merge layers and apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 29,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Be Mine - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Markia
You must obtain a license to use these tubes at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Good and Plenty"
You an purchase this awesome kit at her store HERE
Mask of choice
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 91 & place as a new layer
Place your main tube to left of frame
Add Xero Radiance
Grab the freehand tool and draw a circle around the frame
Open paper 25 and place as a new layer
selections invert delete
move paper under frame
Place close up of tube in the frame
Apply Xero Radiance again
Now lets add our elements around the tube
I used:
Element 65
Element 70
Element 78
Element 85
Element 98
Element 111
Element 116
Element 124
 
Merge layers and apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 5,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sweet Valentine Pinup - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
You must obtain a license to use this art at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Chocolate Mint Valentine"
You an purchase this awesome kit at her store HERE
Template #170 by Millie HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Xero Porcelin
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright & wordart
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper29
selection invert delete
select none delete the original
 
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper24
selection invert delete
select none delete the original
 
Click on layers 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper27
selection invert delete
select none delete the original
 
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper35
selection invert delete
select none delete the original
 
Click on layer 9 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
 
Place your main tube
Add Xero Radiance
Add Xero Porcelin
 
Now time to add our elements
I used the following:
Element 1
Element 4
Element 18
Element 28
Element 30
Element 37
Element 41
Element 48
Element 51
Element 53
Element 54
Element 56
Element 57
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 7,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Love You - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
Which you must obtain a license to use at her store HERE
FTU Cluster frame by Mary from Sweet As Honey Creationz  HERE
FTU kit by mary to match the cluster HERE
Mask of choice
Please leave some love when you download 
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open cluster frame - shift D and close original
Resize cluster 92% all layers
canvas size 700x700
grab the freehand tool and go around the frame
open paper 6 from kit - paste as new layer under frame
selections invert delete
Place your main tube where you desire
Apply Xero Radiance with settings of choice
Now add any elements of choice from kit
I used the following:
Decor 1
Heart Butterfly 1
Valentine 1
Sparkles 3 - I duplicated several times
 
Merge your layers
Open paper 1 from kit and place as a new layer
Open mask and apply to tag
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 17,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Love Like Mine - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Alex Prihodko
Which you must obtain a license to use at Pic for Design HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Love Like Mine"
You an purchase this awesome kit HERE
Template #452 by Missy HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x685
delete copyright,wordart & all samll circles
 
Click on squares 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on left & right circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
 
Click on squares 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on oval shape selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on the 2 circle backs and add noise with settings of choice
Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on medium circles left & right selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on the 2 circle lines and add noise with settings of choice
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Basket
Cupcake
Drink
Gift 1
Gumball Machine
Wreath
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 25, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Caught Smoochin - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use at his store HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Caught Smoochin"
You an purchase this awesome kit HERE
Template #1 by Peachy Keen Designs HERE
Mask 7 by Scrappin Krazy Designs HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize by 115
Canvas size 700x700
delete copyright,flourishes & text
 
Click on square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on square frame selections,select all, float,defloat
add new layer & flood fill with color of choice
select none delete the original
add noise
 
Click on hearts selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on hearts frame selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
add noise again
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Flower 9
Ribbon
WA 1&2
 
Merge your layers
Open paper 10 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Feburary 2,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, April 21, 2013

Filled With Emo - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
You can purchase these tubes at Pics for Design HERE
FTU Scrap Kit by Mizteeque from  called "Sweet Emo"
You an purchase this awesome kit HERE
FTU Cluster Frame by Vesta that matches the kit HERE
Check out all the awesome clusters from the chicks while you are there!!!
Plugins Used:
Xero Radiance
Penta Jeans
 
Ok Lets get Started:
Open cluster, duplicate and close the original
Using the freehand tool draw around the frame
Add a new layer under frame and flood fill with gradient
I used the sunburst effect
Selections select none
Apply Penta Jeans with default settings
 
Place tube of choice to right of frame
Apply Xero Radiance with settings of choice

I always build around my tube
I added the following elements:
Element 5
Element 6
Element 12
Element 15
Element 24
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 21,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Magic Candy Girl - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Marika
You can purchase her tubes at CDO HERE
PTU kit by Cari from Black Widow Creations called "Magic Candy"
After today you can purchase this kit at her stores HERE
Mask of choice
Please leave some love when you download
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 15 & place as a new layer
resize frame 85%
Grab the magic wand & click inside the frame
Selection modify expand by 8
Open paper 9 & place as a new layer
Selections invert delete
Move paper under frame
 
Place your main tube where you desire
 
Add elements around the tube
Here are the ones I used:
Element 1
Element 3
Element 7
Element 9
Element 14
Element 16
Element 17
Element 21
Element 23
Element 24
Element 25
Element 28
 
Merge your layers
Open paper 6
Apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 21,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Friday, April 19, 2013

Feburary 14th - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has now closed
You can purchase his work at his store HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Be My Cupid"
You can grab this kit and 9 more Valentine kits at a steal!!!
You an purchase this awesome kit HERE
Collab templates by Punky & Pooker #4 HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,wordart,pink left square & pink square 2
 
Click on small left & right rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on DK pink right selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on pink square 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on white rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on DK pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on DK pink circle frame selections,select all, float,defloat
add a new layer and fill with a color of choice
add noise with settings of choice
select none delete the original
 
Click on pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Place your main tube in the center
Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
BFly 1
Bouquet
Bow 1
Cookie Basket
Cupcakes 1-3
Flower 4
Heart 2
Heart 4
Lbug
Note
Pills
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 21,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Hot Stuff Baby - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has now closed
You can purchase his work at his store HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Hot Stuff"
You an purchase this awesome kit HERE
Template #170 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Xero Fritillary
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright & wordart
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on layers 5&6 selections,select all, float,defloat
add new layer and add color of choice
select none delete the original
 
Click on layer 7 selections,select all, float,defloat
add new layer and add color of choice
select none delete the original
 
Click on layer 8 selections,select all, float,defloat
add new layer and add color of choice
select none delete the original
Add Xero Fritillary with settings of choice
 
Click on layers 9 selections,select all, float,defloat
add new layer and add color of choice
select none delete the original
Add noise with settings of choice
 
Place your main tube in the center
Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Banner
Bow 1
Candy
Cupcake 1
Gift
Kiss 1-4
Letter
Rose Gift
 
Merge your layers
Apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 15,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

XOXOXO - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Eugene Rzhevskii
Which you must obtain a license to use at Pics for Design HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Heart Attack"
You an purchase this awesome kit HERE
Template #63 from Tracy HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright
 
Click on square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on heart1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on heart2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Place your tube
Add Xero Radiance with settings of choice
 
Open elements of choice
I used the following:
Candybox
Cupcake 1
Drink
Envelope
Heart Frames 1&2
Love
Muah
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 13,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png